Call or Email for a Fast Free Quote

Phone: 562-946-3100 562-946-3100
E-mail Address:

Service from Start to Finish

Overhead door springs along with cables are the only parts of any mechanism wound under tremendous pressure and their sudden release or improper maintenance and installation could create serious problems and accidents. From their lubrication to their replacement trusting the experienced teams of our company in Auburn is the best thing that you can do because they carry the proper tools and have the knowledge to stabilize and adjust them, maintain and repair them without jeopardizing anyone's safety.Garage Door Springs in California

Replace the springs regularly

There would be nothing more threatening in the garage than old torsion coil trampoline springs, which have lost their flexibility and are ready to snap. Each crew in our company is equipped with the right tools in order to check the efficiency and strengths of the springs and taking into consideration various parameters related to the other parts of the mechanism they can tell you whether extension springs repair will be sufficient or you would need to replace them. In this case, we can suggest the best types of springs for easy opening and stable systems.

We have the expertise and capacity to maintain springs properly lubricating, repairing and inspecting their flexibility and durability and this is the best way to avoid a sudden broken garage door spring. There are different kinds of springs and all of them require frequent examination and replacement for the avoidance of problems. Of course, in case of an emergency our company would offer garage door repair service with extraordinary speed since the condition of the springs would determine your safety and the proper operation of the door.

There are no compromises when it comes to such powerful garage parts and no room for delays but for any problem or regular service you can trust the top technicians of  Hildebrandt Garage Door since the company specializes in all garage door springs. This way, you can be sure of the security of your house and the strength of your springs for a long time.

Contact us and we can maintain the springs today!

We Can Fix Your Broken Garage Door
Our Services Include:
    * Broken Cables
    * Broken Springs
    * Broken Wheels and Rollers
    * Garage Door and Opener Repairs
    * General Maintenance
    * New Garage Doors and Openers
    * Repairing doors that are off track
    * Replace Door Sections
    * Residential Garage Door Specialists
    * Any Garage Doors
    * Insulated and non-Insulated Doors

 Premier Garage Door Tune Up

Did you know?
Just like cars, garage doors need to be maintained to keep them safe. Our thorough inspection (outlined below) will help prolong the life of your door and the opener while keeping them safe, quiet and dependable. Annual tune-ups prevent minor problems from turning into huge disasters.


Sectional Door Checklist
  1. Inspect all hinges for wear and cracks.
  2. Inspect all rollers for loose bearings and faulty roller stems.
  3. Inspect end bearings and center cones on torsion tube.
  4. Inspect track for bends or misalignment.
  5. Inspect sections for bends or cracks.
  6. Lubricate all moving parts.
  7. Tighten all nuts and bolts.
  8. Wood sectional – tighten hinges whether loose or not.
  9. Balance and adjust accordingly
One Piece Door Checklist
  1. Inspect all 5 pivot points on hardware for worn parts.
  2. Check for safety wire and clips on springs.
  3. Inspect jambs to see if they are split or hardware is rubbing door.
  4. Confirm if chains are welded links.
  5. Inspect to see if bottom or top rail is split.
  6. Lubricate all moving parts and springs.
  7. Tighten truss rods and end brackets.
  8. Check the door for balance and adjust accordingly.



Opener Tune-up

Chain Drives/Belt Drives

  1. Lubricate chain rail and trolley.
  2. Tighten chain or belt if necessary.
  3. Open motor head and lubricate worn gear.
  4. Inspect gear and sprocket for wear and tear.
  5. Check safety reverse – red tag opener if it does not.
  6. Check drive arm bolt and pins to make sure they are tight.
  7. Inspect and test up and down force.
Screw Drives
  1. Lubricate screw. Low temp grease.
  2. Adjust limits.
  3. Adjust electric eyes and clean.
  4. Check safety reverse and red tag if it fails.
  5. Inspect and test up and down force.
General Opener
  1. Straighten receiver wire.
  2. Check wall button functions.
    1. Activation Switch.
    2. Light Switch.
    3. Lock Switch.


At Hildebrandt Doors, we believe that your project should be kept as simple and straightforward as possible, regardless how complex the task may seem.


Please call to schedule a Hildebrandt Door Tech to come out.

1-855-746-2689 (toll free)


Print Print | Sitemap
© Hildebrandt Industries